 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Schottky barrier diode RB060L-40 *Applications Rectifying small power *Dimensions (Unit : mm) *Land size figure 2.0 2.0 2.60.2 *Features 1)Small power mold type. (PMDS) 2) Low IR 3) High reliability *Construction Silicon epitaxial planar 0.10.02 0.1 5.0 0 .3 3 6 4.5 0.2 1 .2 0.3 PMDS 1.50.2 2.00.2 *Structure ROHM : PMDS JEDEC : SOD-106 Manufacture Date *Taping dimensions (Unit : mm) 2.00.05 4.00.1 1.550.05 1.750.1 0.3 5.50.05 1.55 2.90.1 4.00.1 2.8MAX Reverse voltage (repetitive peak) Reverse voltage (DC) Average rectified forward current Forward current surge peak 60Hz1cyc Junction temperature Storage temperature Symbol VRM VR Io IFSM Tj Tstg (*1) Mounted on epoxy board. 180Half sine wave *Electrical characteristic (Ta=25 C) Parameter Forward voltage *Absolute maximum ratings (Ta=25 C) Parameter Limits 40 40 2 70 125 -40 to +125 Unit V V A A C C Symbol VF1 VF2 IR j-a j-a Min. - Typ. - Max. 0.50 0.45 1 90 120 Unit V V mA Conditions IF=2.0A IF=1.0A VR=40V Mounteing on alumina board Mounted on epxy board Reverse current Thermal impedance C/W www.rohm.com (c)2009 ROHM Co., Ltd. All rights reserved. 1/3 5.30.1 0.05 9.50.1 2009.05 - Rev.G 120.2 4.2 RB060L-40 Data Sheet 10 Ta=75 1000000 100000 REVERSE CURRENT:IR(uA) Ta=150 1000 f =1MHz CAPACITANCE BETWEEN TERMINALS:Ct(pF) FORWARD CURRENT:IF(A) 1 Ta=150 Ta=125 Ta=25 10000 1000 100 10 1 0.1 0.01 0 5 10 Ta=125 100 Ta=75 0.1 Ta=-25 Ta=25 10 Ta=-25 0.01 0 100 200 300 400 500 600 FORWARD VOLTAGE VF(mV) VF-I F CHARACTERISTICS 15 20 25 30 35 40 1 0 5 10 15 20 25 30 REVERSE VOLTAGE:VR(V) VR-Ct CHARACTERISTICS REVERSE VOLTAGE VR(V) VR-I R CHARACTERISTICS 480 100 600 FORWARD VOLTAGE:VF(mV) REVERSE CURRENT:IR(uA) 470 CAPACITANCE BETWEEN TERMINALS:Ct(pF) Ta=25 IF=2A n=30pcs 90 80 70 60 50 40 30 20 10 AVE:9.069uA Ta=25 VR=40V n=30pcs 590 580 570 560 550 540 530 520 510 500 Ta=25 f =1MHz VR=0V n=10pcs 460 450 AVE:460.4mV AVE:579.1pF 440 430 0 VF DISPERSION MAP IR DISPERSION MAP Ct DISPERSION MAP 200 Ifsm 1cyc 20 200 RESERVE RECOVERY TIME:trr(ns) PEAK SURGE FORWARD CURRENT:IFSM(A) 150 8.3ms PEAK SURGE FORWARD CURRENT:IFSM(A) 15 Ta=25 IF=0.5A IR=1A Irr=0.25*IR n=10pcs If sm 8.3ms 8.3ms 150 1cy c 100 AVE:157.0A 10 100 50 5 50 AVE:9.3ns 0 0 0 1 10 100 I FSM DISRESION MAP trr DISPERSION MAP NUMBER OF CY CLES I FSM-CY CLE CHARACTERISTICS 300 Ifsm t 1000 2 THAERMAL IMPEDANCE:Rth ( /W) Mounted on epoxy board Rth(j-a) FORWARD POWER DISSIPATION:Pf(W) D=1/2 PEAK SURGE FORWARD CURRENT:IFSM(A) 250 DC 100 TRANSIENT 200 Sin( 1 180) 150 10 Rth(j-c) arial IM=10mA IF=1A 100 1 50 1ms 0.1 0.001 time 300us 0.01 0.1 1 10 100 1000 0 1 10 100 0 0 1 2 3 4 5 TIME:t(ms) I FSM-t CHARACTERISTICS TIME:t(s) Rth-t CHARACTERISTICS AVERAGE RECTIFIED FORWARD CURRENT Io(A) Io-Pf CHARACTERISTICS www.rohm.com (c)2009 ROHM Co., Ltd. All rights reserved. 2/3 2009.05 - Rev.G RB060L-40 5 5 Data Sheet 0A 0V t T Io VR D=t/T VR=20V Tj=125 10 0A Io AVERAGE RECTIFIE FORWARD CURRENT:Io(A) 8 DC REVERSE POWER DISSIPATION:PR (W) T 3 D=t/T VR=20V Tj=125 AVERAGE RECTIFIED FORWARD CURRENT:Io(A) 4 0V t VR 4 DC 3 6 D=1/2 2 D=1/2 4 2 D=1/2 Sin( 180) 2 DC 1 1 Sin( 180) Sin( 180) 0 0 5 10 15 20 25 30 35 40 0 0 25 50 75 100 125 0 0 25 50 75 100 125 REVERSE VOLTAGE:VR(V) VR-PR CHARACTERISTICS AMBIENT TEMPERATURE:Ta( ) Derating Curv e (Io-Ta) CASE TEMPARATURE:Tc( ) Derating Curv e (Io-Tc) 30 No break at 30kV ELECTROSTATIC DISCHARGE TEST ESD(KV) 25 20 15 AVE:17.6kV 10 5 0 C=200pF R=0 C=100pF R=1.5k ESD DISPERSION MAP www.rohm.com (c)2009 ROHM Co., Ltd. All rights reserved. 3/3 2009.05 - Rev.G Notice Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuel-controller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com (c) 2009 ROHM Co., Ltd. All rights reserved. R0039A |
Price & Availability of RB060L-4009
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |